C0105
Brake Pedal Position Sensor Circuit Low
2000-2002 Rolls-Royce Corniche 6.75L V8 π·πΊ
Moderate SeverityChassis
Description
The brake pedal position sensor signal voltage is below the minimum threshold.
Symptoms
- ABS light on
- Brake assist fault
- Module reads brake as always applied
Common Causes
- Short to ground in sensor circuit
- Faulty sensor
- Low supply voltage to sensor
Diagnostic Steps
- Test sensor signal voltage
- Check for shorts to ground
- Verify supply voltage at sensor
- Inspect wiring harness
Repair Notes
Repair short circuit or replace brake pedal position sensor.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0105 on Other Vehicles
Rolls-Royce Cullinan
2019-2024 6.75L V12 Twin Turbo
Rolls-Royce Dawn
2016-2024 6.6L V12 Twin Turbo
Rolls-Royce Ghost
2010-2024 6.6L V12 Twin Turbo
Rolls-Royce Phantom VII
2003-2017 6.75L V12
Rolls-Royce Phantom VIII
2018-2024 6.75L V12 Twin Turbo
Rolls-Royce Silver Seraph
1998-2002 5.4L V12
Rolls-Royce Silver Spirit
1990-1998 6.75L V8
Rolls-Royce Silver Spur
1990-1998 6.75L V8
Common Questions
What does code C0105 mean on a 2000-2002 Rolls-Royce Corniche?
C0105 stands for "Brake Pedal Position Sensor Circuit Low". The brake pedal position sensor signal voltage is below the minimum threshold.
What are the symptoms of C0105 on a Rolls-Royce Corniche?
Common symptoms of C0105 include: ABS light on, Brake assist fault, Module reads brake as always applied.
What causes C0105 on a 2000-2002 Rolls-Royce Corniche?
Common causes of C0105 include: Short to ground in sensor circuit, Faulty sensor, Low supply voltage to sensor.