B2800low severityBody
Driver Seat Memory Module Circuit
on 2011 Subaru Legacy 2.5L H4 · AWD
What this code means
Malfunction in the driver seat memory system module that stores and recalls seat, mirror, and steering column positions.
Symptoms
- Seat memory positions not saving
- Memory buttons not recalling positions
- Seat moves to wrong position
- Memory linked to wrong key fob
Common causes
- Faulty seat memory module
- Position sensor failure
- Module power loss cleared memory
- Wiring issue
- Key fob not linked to memory position
Diagnostic steps
- Test memory buttons
- Check memory module power and ground
- Inspect position sensors
- Verify key fob memory linking
- Scan memory module for codes
Repair notes
Replace seat memory module or position sensors. Reprogram memory positions after repair.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0006
Passenger Knee Airbag Deployment Circuit
B0007
Rear Left Side Airbag Deployment Circuit
B0008
Rear Right Side Airbag Deployment Circuit
B0010
Driver Side Airbag Deployment
B0011
Driver Side Airbag Deployment Circuit Open