Back to 2023 Tesla Model 3

2023 TESLA MODEL 3

Standard Range Single Motor RWDAWDAUTOMATICev
10 active safety recalls on this vehicle — view recalls
Repairs0Labor406Torque4197Fluid8DTC557Battery0Maintenance0Recalls10
P2138critical severityPowertrain

Throttle/Pedal Position Sensor/Switch D/E Voltage Correlation

on 2023 Tesla Model 3 Standard Range Single Motor RWD · AWD

What this code means

The dual accelerator pedal position sensors report conflicting values.

Symptoms

  • Limp mode
  • No throttle response
  • Check engine light
  • Engine at idle only

Common causes

  • Failed APP sensor
  • Corroded pedal connector
  • Wiring fault
  • 5V reference issue

Diagnostic steps

  1. Check APP sensor D and E voltages
  2. Verify 5V reference
  3. Inspect pedal connector

Repair notes

Replace accelerator pedal assembly. Check shared 5V reference circuit.

Other Powertrain codes on this vehicle

Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →