2015-2024 Dodge Challenger SRT Hellcat Engine Rebuild Torque Specs

6.2L V8 Supercharged

Applies to 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, and 2024 Dodge Challenger SRT Hellcat

Labor Time:25 hours

Torque Values (25 specifications)

Component	Nm	lb-ft	Notes
⚠️ Balance Shaft Bolts	25	18	—
⚠️ Camshaft Bearing Cap Bolts	14	10	Tighten in sequence, 3 passes
⚠️ Camshaft Cap Bolts	14	10	Tighten in sequence from center outward, multiple passes
⚠️ Connecting Rod Bolts	45	33	TTY - critical torque plus angle
Cover Bolts	22	16	—
⚠️ Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
⚠️ Cylinder Head Bolts	65	48	TTY - tighten in sequence plus angle
Electrical Connector Bolts	9	7	—
⚠️ Exhaust Manifold Nuts	30	22	Apply anti-seize, work hot-to-cold
⚠️ Flywheel Bolts	95	70	Often TTY, tighten in star pattern
⚠️ Gasket Bolts	27	20	—
⚠️ Gasket Surface Bolts	27	20	Clean mating surfaces
⚠️ Intake Manifold Bolts	25	18	—
⚠️ Main Bearing Cap Bolts	75	55	TTY - tighten in sequence plus angle
⚠️ Mounting Bolts	64	47	—
⚠️ Oil Drain Plug	35	26	Use new crush washer
⚠️ Oil Pan Bolts	12	9	Tighten in sequence
⚠️ Oil Pump Bolts	12	9	—
⚠️ Oil Pump Pickup Tube	12	9	—
Sensor Bolts	15	11	—
Sensor Mounting Bolts	15	11	—
⚠️ Timing Chain Guide Bolts	12	9	Replace if worn
⚠️ Timing Chain Tensioner Bolt	25	18	Install with pin/clip to compress
⚠️ Timing Cover Bolts - 8mm	25	18	Tighten in sequence
Valve Cover Bolts	10	7	Tighten in sequence

Other Jobs with Torque Specs

Common Questions

What is the torque spec for engine rebuild on a 2015-2024 Dodge Challenger SRT Hellcat?

The primary torque specification for engine rebuild on a 2015-2024 Dodge Challenger SRT Hellcat is 25 Nm (18 lb-ft).

How many torque specs are there for Dodge Challenger SRT Hellcat engine rebuild?

There are 25 torque specifications for engine rebuild on the 2015-2024 Dodge Challenger SRT Hellcat 6.2L V8 Supercharged, covering all related fasteners and components.