2007-2014 Land Rover LR2 Flywheel Replacement Torque Specs

3.2L I6

Applies to 2007, 2008, 2009, 2010, 2011, 2012, 2013, and 2014 Land Rover LR2

Labor Time:5 hours

Torque Values (13 specifications)

Component	Nm	lb-ft	Notes
Cover Screws	11	8	—
⚠️ Drain Plug	34	25	Use new washer
⚠️ Fill Plug	34	25	—
⚠️ Flywheel Bolts	95	70	Often TTY, tighten in star pattern
Mounting Bolts	27	20	—
⚠️ Mounting Bolts	61	45	—
⚠️ Mounting Bolts	61	45	—
⚠️ Pan Bolts	16	12	—
⚠️ Pan Bolts	16	12	Torque in sequence
Sensor Bolts	11	8	—
Sensor Bolts	11	8	—
⚠️ Transmission Drain Plug	30	22	Use new crush washer if equipped
Transmission Pan Bolts	12	9	Tighten in criss-cross pattern

The primary torque specification for flywheel replacement on a 2007-2014 Land Rover LR2 is 11 Nm (8 lb-ft).

There are 13 torque specifications for flywheel replacement on the 2007-2014 Land Rover LR2 3.2L I6, covering all related fasteners and components.