2011-2020 Toyota Sienna Steering Angle Sensor Torque Specs

3.5L V6

Applies to 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, and 2020 Toyota Sienna

Labor Time:1 hours

Torque Values (16 specifications)

Component	Nm	lb-ft	Notes
Cover Screws	12	9	—
Cover Screws	12	9	—
Mounting Bolts	31	23	—
Mounting Bolts	31	23	—
⚠️ Power Steering Line Fittings	30	22	Use new O-rings \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Power Steering Line Fittings	30	22	Use new O-rings \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Rack Bolts	117	86	—
Rack Bolts	117	86	—
⚠️ Steering Rack Bolts	100	74	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Steering Rack Bolts	100	74	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod End Castle Nut	55	41	Use new cotter pin \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Tie Rod End Castle Nut	55	41	Use new cotter pin \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Tie Rod Nut	62	46	—
⚠️ Tie Rod Nut	62	46	—
⚠️ Wheel Lug Nuts	156	115	—
Wheel Lug Nuts	156	115	—

The primary torque specification for steering angle sensor on a 2011-2020 Toyota Sienna is 12 Nm (9 lb-ft).

There are 16 torque specifications for steering angle sensor on the 2011-2020 Toyota Sienna 3.5L V6, covering all related fasteners and components.