ShopBaseFree forever shop management software for auto repair shops
Try ShopBase Free →
Home/Torque Specs/Acura/MDX/2014-2020 3.5L V6/Engine Rebuild

2014-2020 Acura MDX Engine Rebuild Torque Specs

3.5L V6

Applies to 2014, 2015, 2016, 2017, 2018, 2019, and 2020 Acura MDX

Labor Time:25 hours
View Labor Time Details →

🔧 Torque Values28 specifications

Componentlb-ftNmNotes
1825—
1014Tighten in sequence, 3 passes
1014Tighten in sequence from center outward, multiple passes
3345TTY - critical torque plus angle
1419—
1419—
133180Often TTY - check spec, may require impact
4865TTY - tighten in sequence plus angle
68—
2230Apply anti-seize, work hot-to-cold
7095Often TTY, tighten in star pattern
1723—
1723Clean mating surfaces
1825—
5575TTY - tighten in sequence plus angle
2331—
4055—
4054—
2635Use new crush washer
912Tighten in sequence
912—
912—
912—
912—
912Replace if worn
1825Install with pin/clip to compress
1825Tighten in sequence
710Tighten in sequence
⚠️ = Critical torque value | Always verify with vehicle-specific service manual
⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Engine Rebuild Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Mitsubishi Eclipse GSX

1995-1999 2.0L Turbo I4

Common Questions

What is the torque spec for engine rebuild on a 2014-2020 Acura MDX?

The primary torque specification for engine rebuild on a 2014-2020 Acura MDX is 25 Nm (18 lb-ft).

How many torque specs are there for Acura MDX engine rebuild?

There are 28 torque specifications for engine rebuild on the 2014-2020 Acura MDX 3.5L V6, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes