Home/Torque Specs/Audi/A7/2012-2018 3.0L Supercharged V6/Head Gasket - Single

2012-2018 Audi A7 Head Gasket - Single Torque Specs

3.0L Supercharged V6

Applies to 2012, 2013, 2014, 2015, 2016, 2017, and 2018 Audi A7

Labor Time:16.2 hours

🔧 Torque Values16 specifications

Component	lb-ft	Nm	Notes
⚠️ Camshaft Bearing Cap Bolts	10	14	Tighten in sequence, 3 passes
⚠️ Camshaft Cap Bolts	10	14	Tighten in sequence from center outward, multiple passes
⚠️ Camshaft Sprocket Bolt	59	80	Hold cam with wrench on hex
⚠️ Cylinder Head Bolts	68	93	Multi-step + angle
⚠️ Cylinder Head Bolts Step 1	30	40	Always use new TTY bolts
⚠️ Cylinder Head Bolts Step 2	59	80	Tighten in sequence
⚠️ Cylinder Head Bolts Step 3 (90 deg)	7	10	Plus 90 degrees
⚠️ Exhaust Manifold Nuts	22	30	Apply anti-seize, work hot-to-cold
⚠️ Intake Manifold Bolts	18	25	Tighten in sequence
⚠️ Oil Drain Plug	26	35	Use new crush washer
⚠️ Rocker Arm Bolts	22	30	Tighten with cam lobe pointing away
Thermostat Housing Bolts	11	15	—
⚠️ Timing Chain Guide Bolts	9	12	Replace if worn
⚠️ Timing Chain Tensioner Bolt	18	25	Install with pin/clip to compress
Valve Cover Bolts	7	10	Tighten in sequence
⚠️ Water Pump Bolts	18	25	Tighten in criss-cross pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Head Gasket - Single Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Mitsubishi Eclipse GSX

1995-1999 2.0L Turbo I4

Common Questions

What is the torque spec for head gasket - single on a 2012-2018 Audi A7?

The primary torque specification for head gasket - single on a 2012-2018 Audi A7 is 14 Nm (10 lb-ft). Note: Tighten in sequence, 3 passes

How many torque specs are there for Audi A7 head gasket - single?

There are 16 torque specifications for head gasket - single on the 2012-2018 Audi A7 3.0L Supercharged V6, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes