Home/Torque Specs/Audi/Q5/2017-2017 3.0L Supercharged V6/Steering Angle Sensor

2017-2017 Audi Q5 Steering Angle Sensor Torque Specs

3.0L Supercharged V6

The 2017 Audi Q5 is equipped with a 3.0L V6 engine. Below you'll find detailed steering angle sensor torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1.4 hours

View Labor Time Details →

🔧 Torque Values8 specifications

Component	lb-ft	Nm	Notes
Cover Screws	8	11	—
Mounting Bolts	21	28	—
⚠️ Power Steering Line Fittings	22	30	Use new O-rings \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Rack Bolts	79	107	—
⚠️ Steering Rack Bolts	74	100	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod End Castle Nut	41	55	Use new cotter pin \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod Nut	42	57	—
⚠️ Wheel Lug Nuts	105	142	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Steering Angle Sensor Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for steering angle sensor on a 2017-2017 Audi Q5?

The primary torque specification for steering angle sensor on a 2017-2017 Audi Q5 is 11 Nm (8 lb-ft).

How many torque specs are there for Audi Q5 steering angle sensor?

There are 8 torque specifications for steering angle sensor on the 2017-2017 Audi Q5 3.0L Supercharged V6, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes