2008-2012 Audi R8 Brake Fluid Flush Torque Specs

4.2L V8

Applies to 2008, 2009, 2010, 2011, and 2012 Audi R8

Labor Time:1.1 hours

🔧 Torque Values6 specifications

Component	lb-ft	Nm	Notes
Bleeder Screw	10	14	Front and rear
⚠️ Bracket Bolts	75	102	—
⚠️ Caliper Bolts	65	88	—
Master Cylinder Cap	3	4	Hand tight
Mounting Bolts	20	27	—
⚠️ Wheel Lug Nuts	100	136	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

1990-1997 4.6L V8 Modular

2007-2012 3.7L I5

2011-2016 6.7L V8 Power Stroke Diesel

2022-2024 GT-Line Dual Motor AWD

1992-1995 1.5L I4 D15

2016-2023 2.0L Turbo I4

The primary torque specification for brake fluid flush on a 2008-2012 Audi R8 is 14 Nm (10 lb-ft). Note: Front and rear

There are 6 torque specifications for brake fluid flush on the 2008-2012 Audi R8 4.2L V8, covering all related fasteners and components.