ShopBaseComplete shop management for auto repair shops · $249/mo

Try ShopBase →

Home/Torque Specs/Audi/R8/2010-2010 4.2L V8/Upper Control Arm

2010-2010 Audi R8 Upper Control Arm Torque Specs

4.2L V8

The 2010 Audi R8 is equipped with a 4.2L V8 engine. Below you'll find detailed upper control arm torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:2 hours

View Labor Time Details →

🔧 Torque Values6 specifications

Component	lb-ft	Nm	Notes
⚠️ Ball Joint Nut	65	88	Use new cotter pin
⚠️ Control Arm Bolts	95	129	Torque with weight on wheels
Mounting Bolts	20	27	—
⚠️ Strut Bolts	85	115	—
⚠️ Sway Bar Link	45	61	—
⚠️ Wheel Lug Nuts	100	136	Torque in star pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Upper Control Arm Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for upper control arm on a 2010-2010 Audi R8?

The primary torque specification for upper control arm on a 2010-2010 Audi R8 is 88 Nm (65 lb-ft). Note: Use new cotter pin

How many torque specs are there for Audi R8 upper control arm?

There are 6 torque specifications for upper control arm on the 2010-2010 Audi R8 4.2L V8, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes