Home/Torque Specs/Audi/R8/2015-2015 5.2L V10 (Gen 1, 525hp)/Transmission Flush

2015-2015 Audi R8 Transmission Flush Torque Specs

5.2L V10 (Gen 1, 525hp)

The 2015 Audi R8 is equipped with a 5.2L V10 engine. Below you'll find detailed transmission flush torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:2 hours

View Labor Time Details →

🔧 Torque Values9 specifications

Component	lb-ft	Nm	Notes
Cover Screws	8	11	—
⚠️ Drain Plug	25	34	Use new washer
⚠️ Fill Plug	25	34	—
⚠️ Flywheel Bolts	70	95	Often TTY, tighten in star pattern
⚠️ Mounting Bolts	45	61	—
⚠️ Pan Bolts	12	16	Torque in sequence
Sensor Bolts	8	11	—
⚠️ Transmission Drain Plug	22	30	Use new crush washer if equipped
Transmission Pan Bolts	9	12	Tighten in criss-cross pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Transmission Flush Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for transmission flush on a 2015-2015 Audi R8?

The primary torque specification for transmission flush on a 2015-2015 Audi R8 is 11 Nm (8 lb-ft).

How many torque specs are there for Audi R8 transmission flush?

There are 9 torque specifications for transmission flush on the 2015-2015 Audi R8 5.2L V10 (Gen 1, 525hp), covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes