2007-2009 Audi S8 Control Arm Bushing - Rear Torque Specs

5.2L V10

Applies to 2007, 2008, and 2009 Audi S8

Labor Time:2.7 hours

🔧 Torque Values5 specifications

Component	lb-ft	Nm	Notes
⚠️ Ball Joint Nut	65	88	New cotter pin
⚠️ Ball Joint Nut	65	88	—
⚠️ Control Arm Bolts	95	129	—
⚠️ Control Arm Bolts	125	169	Torque with weight on wheels
⚠️ Wheel Lug Nuts	100	136	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

1990-1997 4.6L V8 Modular

2007-2012 3.7L I5

2011-2016 6.7L V8 Power Stroke Diesel

2022-2024 GT-Line Dual Motor AWD

1992-1995 1.5L I4 D15

2016-2023 2.0L Turbo I4

The primary torque specification for control arm bushing - rear on a 2007-2009 Audi S8 is 88 Nm (65 lb-ft). Note: New cotter pin

There are 5 torque specifications for control arm bushing - rear on the 2007-2009 Audi S8 5.2L V10, covering all related fasteners and components.