Home/Torque Specs/BMW/i3/2019-2021 42 kWh Single Motor RWD/Engine Oil Cooler

2019-2021 BMW i3 Engine Oil Cooler Torque Specs

42 kWh Single Motor RWD

Applies to 2019, 2020, and 2021 BMW i3

Labor Time:3.9 hours

🔧 Torque Values8 specifications

Component	lb-ft	Nm	Notes
Coolant Drain Plug	11	15	—
Cover Screws	8	11	—
Hose Clamps	2	3	—
⚠️ Housing Bolts	10	14	—
Mounting Bolts	20	27	—
⚠️ Pump Bolts	18	24	—
Thermostat Housing Bolts	11	15	—
⚠️ Water Pump Bolts	18	25	Tighten in criss-cross pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Engine Oil Cooler Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for engine oil cooler on a 2019-2021 BMW i3?

The primary torque specification for engine oil cooler on a 2019-2021 BMW i3 is 15 Nm (11 lb-ft).

How many torque specs are there for BMW i3 engine oil cooler?

There are 8 torque specifications for engine oil cooler on the 2019-2021 BMW i3 42 kWh Single Motor RWD, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes