Home/Torque Specs/Buick/Enclave/2018-2018 3.6L V6/Transmission Control Module

2018-2018 Buick Enclave Transmission Control Module Torque Specs

3.6L V6

The 2018 Buick Enclave is equipped with a 3.6L V6 engine. Below you'll find detailed transmission control module torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1 hours

View Labor Time Details →

🔧 Torque Values5 specifications

Component	lb-ft	Nm	Notes
Cover Screws	9	12	—
Mounting Bolts	23	31	—
⚠️ Mounting Bolts	52	70	—
⚠️ Pan Bolts	14	19	—
Sensor Bolts	9	12	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Transmission Control Module Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for transmission control module on a 2018-2018 Buick Enclave?

The primary torque specification for transmission control module on a 2018-2018 Buick Enclave is 12 Nm (9 lb-ft).

How many torque specs are there for Buick Enclave transmission control module?

There are 5 torque specifications for transmission control module on the 2018-2018 Buick Enclave 3.6L V6, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes