Home/Torque Specs/Buick/Envision/2016-2020 2.5L I4/Limited Slip Clutch Pack

2016-2020 Buick Envision Limited Slip Clutch Pack Torque Specs

2.5L I4

Applies to 2016, 2017, 2018, 2019, and 2020 Buick Envision

Labor Time:4 hours

🔧 Torque Values16 specifications

Component	lb-ft	Nm	Notes
⚠️ Axle Nut	180	244	Use new nut, stake after
Axle Nut	180	244	Use new nut, stake after
⚠️ CV Bolts	45	61	—
CV Bolts	45	61	—
⚠️ CV Joint Bolts	45	61	—
CV Joint Bolts	45	61	—
Cover Screws	8	11	—
Cover Screws	8	11	—
⚠️ Differential Cover Bolts	25	34	Apply RTV sealant
Differential Cover Bolts	25	34	Apply RTV sealant
⚠️ Driveshaft Bolts	55	75	—
Driveshaft Bolts	55	75	—
Mounting Bolts	20	27	—
Mounting Bolts	20	27	—
⚠️ Wheel Lug Nuts	100	136	—
Wheel Lug Nuts	100	136	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Limited Slip Clutch Pack Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for limited slip clutch pack on a 2016-2020 Buick Envision?

The primary torque specification for limited slip clutch pack on a 2016-2020 Buick Envision is 244 Nm (180 lb-ft). Note: Use new nut, stake after

How many torque specs are there for Buick Envision limited slip clutch pack?

There are 16 torque specifications for limited slip clutch pack on the 2016-2020 Buick Envision 2.5L I4, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes