Home/Torque Specs/Cadillac/ATS/2016-2016 2.5L I4/Control Arm Bushing - Front Upper

2016-2016 Cadillac ATS Control Arm Bushing - Front Upper Torque Specs

2.5L I4

The 2016 Cadillac ATS is equipped with a 2.5L inline-4 engine. Below you'll find detailed control arm bushing - front upper torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:2 hours

View Labor Time Details →

🔧 Torque Values7 specifications

Component	lb-ft	Nm	Notes
⚠️ Ball Joint Nut	65	88	Use new cotter pin
⚠️ Control Arm Bolts	122	165	Torque with vehicle weight on wheels
⚠️ Strut Bolts	85	115	—
⚠️ Strut Tower Nuts	37	50	—
⚠️ Sway Bar Link	45	61	—
Sway Bar Link Nuts	41	55	Hold shaft with Allen key
⚠️ Wheel Lug Nuts	100	136	Torque in star pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Control Arm Bushing - Front Upper Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for control arm bushing - front upper on a 2016-2016 Cadillac ATS?

The primary torque specification for control arm bushing - front upper on a 2016-2016 Cadillac ATS is 88 Nm (65 lb-ft). Note: Use new cotter pin

How many torque specs are there for Cadillac ATS control arm bushing - front upper?

There are 7 torque specifications for control arm bushing - front upper on the 2016-2016 Cadillac ATS 2.5L I4, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes