Home/Torque Specs/Cadillac/Brougham/1990-1990 5.0L V8/Steering Angle Sensor

1990-1990 Cadillac Brougham Steering Angle Sensor Torque Specs

5.0L V8

The 1990 Cadillac Brougham is equipped with a 5.0L V8 engine. Below you'll find detailed steering angle sensor torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1 hours

View Labor Time Details →

🔧 Torque Values9 specifications

Component	lb-ft	Nm	Notes
⚠️ Coupling Bolt	31	42	—
Cover Screws	10	14	—
Mounting Bolts	25	34	—
⚠️ Power Steering Line Fittings	31	42	Use new O-rings
⚠️ Rack Bolts	94	127	—
⚠️ Rack Mounting Bolts	94	127	—
⚠️ Tie Rod End Nut	50	68	Use new cotter pin
⚠️ Tie Rod Nut	50	68	—
⚠️ Wheel Lug Nuts	125	169	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Steering Angle Sensor Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for steering angle sensor on a 1990-1990 Cadillac Brougham?

The primary torque specification for steering angle sensor on a 1990-1990 Cadillac Brougham is 42 Nm (31 lb-ft).

How many torque specs are there for Cadillac Brougham steering angle sensor?

There are 9 torque specifications for steering angle sensor on the 1990-1990 Cadillac Brougham 5.0L V8, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs