Home/Torque Specs/Chevrolet/Impala/2012-2013 3.6L V6/Lower Control Arm - Front

2012-2013 Chevrolet Impala Lower Control Arm - Front Torque Specs

3.6L V6

Applies to 2012, and 2013 Chevrolet Impala

Labor Time:2 hours

🔧 Torque Values8 specifications

Component	lb-ft	Nm	Notes
⚠️ Ball Joint Nut	74	100	Tighten to align cotter pin hole.
⚠️ Control Arm Bolts	122	165	Torque with vehicle weight on wheels
⚠️ Lower Control Arm Pivot Bolts	129	175	TORQUE AT RIDE HEIGHT.
Mounting Bolts	23	31	—
⚠️ Strut Bolts	98	133	—
⚠️ Strut Tower Nuts	37	50	—
Sway Bar Link Nuts	41	55	Hold shaft with Allen key
⚠️ Wheel Lug Nuts	115	156	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Lower Control Arm - Front Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for lower control arm - front on a 2012-2013 Chevrolet Impala?

The primary torque specification for lower control arm - front on a 2012-2013 Chevrolet Impala is 100 Nm (74 lb-ft). Note: Tighten to align cotter pin hole.

How many torque specs are there for Chevrolet Impala lower control arm - front?

There are 8 torque specifications for lower control arm - front on the 2012-2013 Chevrolet Impala 3.6L V6, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes