ShopBaseComplete shop management for auto repair shops · $249/mo

Try ShopBase →

Home/Torque Specs/Chrysler/300/2008-2008 3.5L V6/Bedside Panel

2008-2008 Chrysler 300 Bedside Panel Torque Specs

3.5L V6

The 2008 Chrysler 300 is equipped with a 3.5L V6 engine. Below you'll find detailed bedside panel torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:5 hours

View Labor Time Details →

🔧 Torque Values12 specifications

Component	lb-ft	Nm	Notes
Body Panel Bolts	18	25	—
Bracket Bolts	17	23	—
Bumper Cover Bolts	7	10	—
Cover Screws	9	12	—
⚠️ Door Hinge Bolts	22	30	—
⚠️ Hinge Bolts	23	31	—
Latch Bolts	12	16	—
Mounting Bolts	23	31	—
Panel Bolts	12	16	—
Sensor Bolts	9	12	—
⚠️ Striker Bolts	29	39	—
Trim Clips	2	3	Replace if broken

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Bedside Panel Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for bedside panel on a 2008-2008 Chrysler 300?

The primary torque specification for bedside panel on a 2008-2008 Chrysler 300 is 25 Nm (18 lb-ft).

How many torque specs are there for Chrysler 300 bedside panel?

There are 12 torque specifications for bedside panel on the 2008-2008 Chrysler 300 3.5L V6, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes