ShopBaseComplete shop management for auto repair shops · $249/mo

Try ShopBase →

Home/Torque Specs/Chrysler/300/2008-2008 3.5L V6/Upper Control Arm

2008-2008 Chrysler 300 Upper Control Arm Torque Specs

3.5L V6

The 2008 Chrysler 300 is equipped with a 3.5L V6 engine. Below you'll find detailed upper control arm torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1.5 hours

View Labor Time Details →

🔧 Torque Values8 specifications

Component	lb-ft	Nm	Notes
⚠️ Ball Joint Nut	75	102	Use new cotter pin
⚠️ Control Arm Bolts	122	165	Torque with vehicle weight on wheels
Mounting Bolts	23	31	—
⚠️ Strut Bolts	98	133	—
⚠️ Strut Tower Nuts	37	50	—
⚠️ Sway Bar Link	52	71	—
Sway Bar Link Nuts	41	55	Hold shaft with Allen key
⚠️ Wheel Lug Nuts	115	156	Torque in star pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Upper Control Arm Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for upper control arm on a 2008-2008 Chrysler 300?

The primary torque specification for upper control arm on a 2008-2008 Chrysler 300 is 102 Nm (75 lb-ft). Note: Use new cotter pin

How many torque specs are there for Chrysler 300 upper control arm?

There are 8 torque specifications for upper control arm on the 2008-2008 Chrysler 300 3.5L V6, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes