Home/Torque Specs/Chrysler/Crossfire/2004-2008 3.2L V6/Power Steering Pump Pulley

2004-2008 Chrysler Crossfire Power Steering Pump Pulley Torque Specs

3.2L V6

Applies to 2004, 2005, 2006, 2007, and 2008 Chrysler Crossfire

Labor Time:0.8 hours

🔧 Torque Values11 specifications

Component	lb-ft	Nm	Notes
⚠️ Coupling Bolt	25	34	—
⚠️ Power Steering Line Fittings	22	30	Use new O-rings \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Pressure Line Fitting	25	34	New O-ring
⚠️ Pump Mounting Bolts	20	27	—
⚠️ Rack Bolts	75	102	—
⚠️ Rack Mounting Bolts	75	102	—
⚠️ Steering Rack Bolts	74	100	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod End Castle Nut	41	55	Use new cotter pin \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod End Nut	40	54	Use new cotter pin
⚠️ Tie Rod Nut	40	54	—
⚠️ Wheel Lug Nuts	100	136	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Power Steering Pump Pulley Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for power steering pump pulley on a 2004-2008 Chrysler Crossfire?

The primary torque specification for power steering pump pulley on a 2004-2008 Chrysler Crossfire is 34 Nm (25 lb-ft).

How many torque specs are there for Chrysler Crossfire power steering pump pulley?

There are 11 torque specifications for power steering pump pulley on the 2004-2008 Chrysler Crossfire 3.2L V6, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes