Home/Torque Specs/Chrysler/Pacifica/2004-2008 4.0L V6/Valve Job - Complete

2004-2008 Chrysler Pacifica Valve Job - Complete Torque Specs

4.0L V6

Applies to 2004, 2005, 2006, 2007, and 2008 Chrysler Pacifica

Labor Time:10 hours

🔧 Torque Values14 specifications

Component	lb-ft	Nm	Notes
⚠️ Camshaft Cap Bolts	10	14	Tighten in sequence from center outward, multiple passes
⚠️ Camshaft Sprocket Bolt	59	80	Hold cam with wrench on hex
Cover Bolts	14	19	—
⚠️ Cylinder Head Bolts	48	65	TTY - tighten in sequence plus angle
⚠️ Exhaust Manifold Nuts	22	30	Apply anti-seize, work hot-to-cold
⚠️ Gasket Bolts	17	23	—
⚠️ Intake Manifold Bolts	18	25	—
Mounting Bolts	23	31	—
⚠️ Mounting Bolts	40	55	—
⚠️ Rocker Arm Bolts	22	30	Tighten with cam lobe pointing away
Sensor Bolts	9	12	—
⚠️ Timing Chain Tensioner Bolt	18	25	Install with pin/clip to compress
⚠️ Timing Cover Bolts - 8mm	18	25	Tighten in sequence
Valve Cover Bolts	7	10	Tighten in sequence

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Valve Job - Complete Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for valve job - complete on a 2004-2008 Chrysler Pacifica?

The primary torque specification for valve job - complete on a 2004-2008 Chrysler Pacifica is 14 Nm (10 lb-ft). Note: Tighten in sequence from center outward, multiple passes

How many torque specs are there for Chrysler Pacifica valve job - complete?

There are 14 torque specifications for valve job - complete on the 2004-2008 Chrysler Pacifica 4.0L V6, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes