ShopBaseFree forever shop management software for auto repair shops
Try ShopBase Free →
Home/Torque Specs/Chrysler/Sebring/2001-2010 2.4L I4/Head Gasket - Single

2001-2010 Chrysler Sebring Head Gasket - Single Torque Specs

2.4L I4

Applies to 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, and 2010 Chrysler Sebring

Labor Time:12 hours
View Labor Time Details →

🔧 Torque Values16 specifications

Componentlb-ftNmNotes
1014Tighten in sequence, 3 passes
1014Tighten in sequence from center outward, multiple passes
5980Hold cam with wrench on hex
6588Multi-step + angle
3040Always use new TTY bolts
5980Tighten in sequence
710Plus 90 degrees
2230Apply anti-seize, work hot-to-cold
1825Tighten in sequence
2635Use new crush washer
2230Tighten with cam lobe pointing away
1115—
912Replace if worn
1825Install with pin/clip to compress
710Tighten in sequence
1825Tighten in criss-cross pattern
⚠️ = Critical torque value | Always verify with vehicle-specific service manual
⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Head Gasket - Single Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Mitsubishi Eclipse GSX

1995-1999 2.0L Turbo I4

Common Questions

What is the torque spec for head gasket - single on a 2001-2010 Chrysler Sebring?

The primary torque specification for head gasket - single on a 2001-2010 Chrysler Sebring is 14 Nm (10 lb-ft). Note: Tighten in sequence, 3 passes

How many torque specs are there for Chrysler Sebring head gasket - single?

There are 16 torque specifications for head gasket - single on the 2001-2010 Chrysler Sebring 2.4L I4, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes