Home/Torque Specs/Chrysler/Sebring/2002-2002 3.5L V6/Transmission Filter and Fluid

2002-2002 Chrysler Sebring Transmission Filter and Fluid Torque Specs

3.5L V6

The 2002 Chrysler Sebring is equipped with a 3.5L V6 engine. Below you'll find detailed transmission filter and fluid torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1.2 hours

View Labor Time Details →

🔧 Torque Values13 specifications

Component	lb-ft	Nm	Notes
Cover Screws	9	12	—
⚠️ Drain Plug	29	39	Use new washer
⚠️ Fill Plug	29	39	—
⚠️ Flywheel Bolts	70	95	Often TTY, tighten in star pattern
Mounting Bolts	23	31	—
⚠️ Mounting Bolts	52	71	—
⚠️ Mounting Bolts	52	70	—
⚠️ Pan Bolts	14	19	Torque in sequence
⚠️ Pan Bolts	14	19	—
Sensor Bolts	9	12	—
Sensor Bolts	9	12	—
⚠️ Transmission Drain Plug	22	30	Use new crush washer if equipped
Transmission Pan Bolts	9	12	Tighten in criss-cross pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Transmission Filter and Fluid Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for transmission filter and fluid on a 2002-2002 Chrysler Sebring?

The primary torque specification for transmission filter and fluid on a 2002-2002 Chrysler Sebring is 12 Nm (9 lb-ft).

How many torque specs are there for Chrysler Sebring transmission filter and fluid?

There are 13 torque specifications for transmission filter and fluid on the 2002-2002 Chrysler Sebring 3.5L V6, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes