Home/Torque Specs/Chrysler/Sebring/2007-2010 2.7L V6/Power Steering Pump

2007-2010 Chrysler Sebring Power Steering Pump Torque Specs

2.7L V6

Applies to 2007, 2008, 2009, and 2010 Chrysler Sebring

Labor Time:1.5 hours

🔧 Torque Values9 specifications

Component	lb-ft	Nm	Notes
⚠️ Power Steering Line Fittings	22	30	Use new O-rings \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Power Steering Pump Bolts	18	25	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Pressure Line Fitting	26	36	New O-ring
⚠️ Pump Mounting Bolts	21	28	—
⚠️ Rack Bolts	79	107	—
⚠️ Return Line Clamp	3	4	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Serpentine Belt Tensioner	41	55	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod Nut	42	57	—
⚠️ Wheel Lug Nuts	105	142	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Power Steering Pump Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for power steering pump on a 2007-2010 Chrysler Sebring?

The primary torque specification for power steering pump on a 2007-2010 Chrysler Sebring is 30 Nm (22 lb-ft). Note: Use new O-rings | ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL

How many torque specs are there for Chrysler Sebring power steering pump?

There are 9 torque specifications for power steering pump on the 2007-2010 Chrysler Sebring 2.7L V6, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes