Home/Torque Specs/Dodge/Challenger/2008-2014 3.6L V6 Pentastar/Coolant Bypass Pipe

2008-2014 Dodge Challenger Coolant Bypass Pipe Torque Specs

3.6L V6 Pentastar

Applies to 2008, 2009, 2010, 2011, 2012, 2013, and 2014 Dodge Challenger

Labor Time:1.5 hours

🔧 Torque Values11 specifications

Component	lb-ft	Nm	Notes
Bleed Screw	6	8	Open during fill
Coolant Drain Plug	11	15	—
Drain Petcock	6	8	Hand tight
Drain Petcock	6	8	Hand tight
Fan Bolts	9	12	—
Hose Clamps	2	3	—
⚠️ Housing Bolts	12	16	—
⚠️ Pump Bolts	21	28	—
⚠️ Pump Bolts	21	28	Torque in sequence
Thermostat Housing Bolts	11	15	—
⚠️ Water Pump Bolts	18	25	Tighten in criss-cross pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Coolant Bypass Pipe Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Mitsubishi Eclipse GSX

1995-1999 2.0L Turbo I4

Common Questions

What is the torque spec for coolant bypass pipe on a 2008-2014 Dodge Challenger?

The primary torque specification for coolant bypass pipe on a 2008-2014 Dodge Challenger is 8 Nm (6 lb-ft). Note: Open during fill

How many torque specs are there for Dodge Challenger coolant bypass pipe?

There are 11 torque specifications for coolant bypass pipe on the 2008-2014 Dodge Challenger 3.6L V6 Pentastar, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes