Home/Torque Specs/Dodge/Challenger/2008-2014 3.6L V6 Pentastar/Piston Rings - All

2008-2014 Dodge Challenger Piston Rings - All Torque Specs

3.6L V6 Pentastar

Applies to 2008, 2009, 2010, 2011, 2012, 2013, and 2014 Dodge Challenger

Labor Time:20 hours

🔧 Torque Values16 specifications

Component	lb-ft	Nm	Notes
⚠️ Connecting Rod Bolts	33	45	TTY - critical torque plus angle
Cover Bolts	14	19	—
Cover Bolts	14	19	—
⚠️ Cylinder Head Bolts	48	65	TTY - tighten in sequence plus angle
Electrical Connector Bolts	6	8	—
⚠️ Gasket Bolts	17	23	—
⚠️ Gasket Surface Bolts	17	23	Clean mating surfaces
⚠️ Main Bearing Cap Bolts	55	75	TTY - tighten in sequence plus angle
Mounting Bolts	23	31	—
⚠️ Mounting Bolts	40	55	—
⚠️ Mounting Bolts	40	54	—
⚠️ Oil Drain Plug	26	35	Use new crush washer
⚠️ Oil Pan Bolts	9	12	Tighten in sequence
⚠️ Oil Pump Pickup Tube	9	12	—
Sensor Bolts	9	12	—
Sensor Mounting Bolts	9	12	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Piston Rings - All Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Mitsubishi Eclipse GSX

1995-1999 2.0L Turbo I4

Common Questions

What is the torque spec for piston rings - all on a 2008-2014 Dodge Challenger?

The primary torque specification for piston rings - all on a 2008-2014 Dodge Challenger is 45 Nm (33 lb-ft). Note: TTY - critical torque plus angle

How many torque specs are there for Dodge Challenger piston rings - all?

There are 16 torque specifications for piston rings - all on the 2008-2014 Dodge Challenger 3.6L V6 Pentastar, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes