Home/Torque Specs/Dodge/Challenger/2019-2019 6.2L V8 Hellcat (707hp)/Camshaft Position Sensor

2019-2019 Dodge Challenger Camshaft Position Sensor Torque Specs

6.2L V8 Hellcat (707hp)

The 2019 Dodge Challenger is equipped with a 6.2L V8 engine. Below you'll find detailed camshaft position sensor torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1.2 hours

View Labor Time Details →

🔧 Torque Values9 specifications

Component	lb-ft	Nm	Notes
Camshaft Position Sensor	7	10	—
Cover Bolts	16	22	—
Electrical Connector Bolts	7	9	—
⚠️ Gasket Bolts	20	27	—
⚠️ Gasket Surface Bolts	20	27	Clean mating surfaces
⚠️ Mounting Bolts	47	64	—
Sensor Bolts	11	15	—
Sensor Mounting Bolts	11	15	—
Valve Cover Bolts	7	10	Tighten in sequence

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Camshaft Position Sensor Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for camshaft position sensor on a 2019-2019 Dodge Challenger?

The primary torque specification for camshaft position sensor on a 2019-2019 Dodge Challenger is 10 Nm (7 lb-ft).

How many torque specs are there for Dodge Challenger camshaft position sensor?

There are 9 torque specifications for camshaft position sensor on the 2019-2019 Dodge Challenger 6.2L V8 Hellcat (707hp), covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes