Home/Torque Specs/Dodge/Challenger/2019-2019 6.2L V8 Hellcat (707hp)/Combination Switch

2019-2019 Dodge Challenger Combination Switch Torque Specs

6.2L V8 Hellcat (707hp)

The 2019 Dodge Challenger is equipped with a 6.2L V8 engine. Below you'll find detailed combination switch torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:2.4 hours

View Labor Time Details →

🔧 Torque Values11 specifications

Component	lb-ft	Nm	Notes
Battery Terminal Bolts	4	6	Do not overtighten
Bracket Bolts	20	27	—
Connector Screws	4	5	—
Cover Screws	11	15	—
⚠️ Ground Bolt	14	18	—
⚠️ Ground Strap Bolt	14	19	Clean contact surfaces
Ground Strap Bolts	9	12	Ensure clean contact
Module Mounting Bolts	6	8	—
⚠️ Mounting Bolts	34	46	—
Sensor Mounting Bolts	7	10	—
⚠️ Terminal Bolts	7	9	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Combination Switch Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for combination switch on a 2019-2019 Dodge Challenger?

The primary torque specification for combination switch on a 2019-2019 Dodge Challenger is 6 Nm (4 lb-ft). Note: Do not overtighten

How many torque specs are there for Dodge Challenger combination switch?

There are 11 torque specifications for combination switch on the 2019-2019 Dodge Challenger 6.2L V8 Hellcat (707hp), covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes