Home/Torque Specs/Dodge/Challenger/2019-2019 6.2L V8 Hellcat (707hp)/Differential Cover Gasket

2019-2019 Dodge Challenger Differential Cover Gasket Torque Specs

6.2L V8 Hellcat (707hp)

The 2019 Dodge Challenger is equipped with a 6.2L V8 engine. Below you'll find detailed differential cover gasket torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1 hours

View Labor Time Details →

🔧 Torque Values9 specifications

Component	lb-ft	Nm	Notes
⚠️ Axle Nut	184	250	Use new cotter pin or stake nut
Cover Screws	11	15	—
⚠️ CV Bolts	61	82	—
⚠️ CV Joint Bolts	61	83	—
Differential Cover Bolts	26	35	—
⚠️ Driveshaft Bolts	74	100	—
⚠️ Driveshaft U-Joint Straps	15	20	Tighten evenly
Mounting Bolts	27	37	—
⚠️ Wheel Lug Nuts	103	140	Torque in star pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Differential Cover Gasket Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for differential cover gasket on a 2019-2019 Dodge Challenger?

The primary torque specification for differential cover gasket on a 2019-2019 Dodge Challenger is 250 Nm (184 lb-ft). Note: Use new cotter pin or stake nut

How many torque specs are there for Dodge Challenger differential cover gasket?

There are 9 torque specifications for differential cover gasket on the 2019-2019 Dodge Challenger 6.2L V8 Hellcat (707hp), covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes