Home/Torque Specs/Dodge/Challenger/2019-2019 6.2L V8 Hellcat (707hp)/Flywheel Replacement

2019-2019 Dodge Challenger Flywheel Replacement Torque Specs

6.2L V8 Hellcat (707hp)

The 2019 Dodge Challenger is equipped with a 6.2L V8 engine. Below you'll find detailed flywheel replacement torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

🔧 Torque Values9 specifications

Component	lb-ft	Nm	Notes
Cover Screws	11	15	—
⚠️ Drain Plug	34	46	Use new washer
⚠️ Fill Plug	34	46	—
⚠️ Flywheel Bolts	70	95	Often TTY, tighten in star pattern
⚠️ Mounting Bolts	61	83	—
⚠️ Pan Bolts	16	22	Torque in sequence
Sensor Bolts	11	15	—
⚠️ Transmission Drain Plug	22	30	Use new crush washer if equipped
Transmission Pan Bolts	9	12	Tighten in criss-cross pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Flywheel Replacement Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for flywheel replacement on a 2019-2019 Dodge Challenger?

The primary torque specification for flywheel replacement on a 2019-2019 Dodge Challenger is 15 Nm (11 lb-ft).

How many torque specs are there for Dodge Challenger flywheel replacement?

There are 9 torque specifications for flywheel replacement on the 2019-2019 Dodge Challenger 6.2L V8 Hellcat (707hp), covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes