Home/Torque Specs/Dodge/Challenger/2019-2019 6.2L V8 Hellcat (707hp)/Steering Angle Sensor

2019-2019 Dodge Challenger Steering Angle Sensor Torque Specs

6.2L V8 Hellcat (707hp)

The 2019 Dodge Challenger is equipped with a 6.2L V8 engine. Below you'll find detailed steering angle sensor torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1.2 hours

View Labor Time Details →

🔧 Torque Values11 specifications

Component	lb-ft	Nm	Notes
⚠️ Coupling Bolt	34	46	—
Cover Screws	11	15	—
Mounting Bolts	27	37	—
⚠️ Power Steering Line Fittings	22	30	Use new O-rings \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Rack Bolts	101	137	—
⚠️ Rack Mounting Bolts	101	137	—
⚠️ Steering Rack Bolts	74	100	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod End Castle Nut	41	55	Use new cotter pin \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod End Nut	54	73	Use new cotter pin
⚠️ Tie Rod Nut	54	73	—
⚠️ Wheel Lug Nuts	135	183	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Steering Angle Sensor Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for steering angle sensor on a 2019-2019 Dodge Challenger?

The primary torque specification for steering angle sensor on a 2019-2019 Dodge Challenger is 46 Nm (34 lb-ft).

How many torque specs are there for Dodge Challenger steering angle sensor?

There are 11 torque specifications for steering angle sensor on the 2019-2019 Dodge Challenger 6.2L V8 Hellcat (707hp), covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes