Home/Torque Specs/Dodge/Challenger/2019-2019 6.2L V8 Hellcat (707hp)/Upper Control Arm - Front

2019-2019 Dodge Challenger Upper Control Arm - Front Torque Specs

6.2L V8 Hellcat (707hp)

The 2019 Dodge Challenger is equipped with a 6.2L V8 engine. Below you'll find detailed upper control arm - front torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1.8 hours

View Labor Time Details →

🔧 Torque Values8 specifications

Component	lb-ft	Nm	Notes
⚠️ Ball Joint Nut	88	119	Use new cotter pin
⚠️ Control Arm Bolts	122	165	Torque with vehicle weight on wheels
Mounting Bolts	27	37	—
⚠️ Strut Bolts	115	156	—
⚠️ Strut Tower Nuts	37	50	—
⚠️ Sway Bar Link	61	83	—
Sway Bar Link Nuts	41	55	Hold shaft with Allen key
⚠️ Wheel Lug Nuts	135	183	Torque in star pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Upper Control Arm - Front Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for upper control arm - front on a 2019-2019 Dodge Challenger?

The primary torque specification for upper control arm - front on a 2019-2019 Dodge Challenger is 119 Nm (88 lb-ft). Note: Use new cotter pin

How many torque specs are there for Dodge Challenger upper control arm - front?

There are 8 torque specifications for upper control arm - front on the 2019-2019 Dodge Challenger 6.2L V8 Hellcat (707hp), covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes