ShopBaseComplete shop management for auto repair shops · $249/mo

Try ShopBase →

Home/Torque Specs/Dodge/Charger/2008-2008 3.5L V6/Fuse Box - Engine Bay

2008-2008 Dodge Charger Fuse Box - Engine Bay Torque Specs

3.5L V6

The 2008 Dodge Charger is equipped with a 3.5L V6 engine. Below you'll find detailed fuse box - engine bay torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:2 hours

View Labor Time Details →

🔧 Torque Values9 specifications

Component	lb-ft	Nm	Notes
Battery Terminal Bolts	4	6	Do not overtighten
Cover Screws	9	12	—
⚠️ Ground Bolt	12	16	—
Ground Strap Bolts	9	12	Ensure clean contact
Module Mounting Bolts	6	8	—
Mounting Bolts	23	31	—
⚠️ Mounting Bolts	29	39	—
Sensor Mounting Bolts	7	10	—
⚠️ Terminal Bolts	6	8	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Fuse Box - Engine Bay Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for fuse box - engine bay on a 2008-2008 Dodge Charger?

The primary torque specification for fuse box - engine bay on a 2008-2008 Dodge Charger is 6 Nm (4 lb-ft). Note: Do not overtighten

How many torque specs are there for Dodge Charger fuse box - engine bay?

There are 9 torque specifications for fuse box - engine bay on the 2008-2008 Dodge Charger 3.5L V6, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes