Home/Torque Specs/Dodge/Charger/2011-2014 5.7L V8 Hemi/Coolant Temperature Sensor

2011-2014 Dodge Charger Coolant Temperature Sensor Torque Specs

5.7L V8 Hemi

Applies to 2011, 2012, 2013, and 2014 Dodge Charger

Labor Time:0.6 hours

🔧 Torque Values16 specifications

Component	lb-ft	Nm	Notes
Bleed Screw	7	9	Open during fill
Bleed Screw	7	9	Open during fill
Coolant Drain Plug	11	15	—
Coolant Drain Plug	11	15	—
Drain Petcock	7	9	Hand tight
Drain Petcock	7	9	Hand tight
Hose Clamps	2	3	—
Hose Clamps	2	3	—
Housing Bolts	14	18	—
⚠️ Housing Bolts	14	18	—
Pump Bolts	24	33	—
⚠️ Pump Bolts	24	33	—
Thermostat Housing Bolts	11	15	—
Thermostat Housing Bolts	11	15	—
Water Pump Bolts	18	25	Tighten in criss-cross pattern
⚠️ Water Pump Bolts	18	25	Tighten in criss-cross pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Coolant Temperature Sensor Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Mitsubishi Eclipse GSX

1995-1999 2.0L Turbo I4

Common Questions

What is the torque spec for coolant temperature sensor on a 2011-2014 Dodge Charger?

The primary torque specification for coolant temperature sensor on a 2011-2014 Dodge Charger is 9 Nm (7 lb-ft). Note: Open during fill

How many torque specs are there for Dodge Charger coolant temperature sensor?

There are 16 torque specifications for coolant temperature sensor on the 2011-2014 Dodge Charger 5.7L V8 Hemi, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes