Home/Torque Specs/Dodge/Dakota/2008-2008 3.7L V6/Coolant Temperature Sensor

2008-2008 Dodge Dakota Coolant Temperature Sensor Torque Specs

3.7L V6

The 2008 Dodge Dakota is equipped with a 3.7L V6 engine. Below you'll find detailed coolant temperature sensor torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:0.5 hours

View Labor Time Details →

🔧 Torque Values9 specifications

Component	lb-ft	Nm	Notes
Bleed Screw	5	7	Open during fill
Coolant Drain Plug	11	15	—
Drain Petcock	5	7	Hand tight
Fan Bolts	8	11	—
Hose Clamps	2	3	—
⚠️ Housing Bolts	10	14	—
⚠️ Pump Bolts	18	24	Torque in sequence
Thermostat Housing Bolts	11	15	—
⚠️ Water Pump Bolts	18	25	Tighten in criss-cross pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Coolant Temperature Sensor Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for coolant temperature sensor on a 2008-2008 Dodge Dakota?

The primary torque specification for coolant temperature sensor on a 2008-2008 Dodge Dakota is 7 Nm (5 lb-ft). Note: Open during fill

How many torque specs are there for Dodge Dakota coolant temperature sensor?

There are 9 torque specifications for coolant temperature sensor on the 2008-2008 Dodge Dakota 3.7L V6, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes