ShopBaseComplete shop management for auto repair shops · $249/mo

Try ShopBase →

Home/Torque Specs/Dodge/Dakota/2008-2008 3.7L V6/Transfer Case

2008-2008 Dodge Dakota Transfer Case Torque Specs

3.7L V6

The 2008 Dodge Dakota is equipped with a 3.7L V6 engine. Below you'll find detailed transfer case torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:4 hours

View Labor Time Details →

🔧 Torque Values10 specifications

Component	lb-ft	Nm	Notes
⚠️ Axle Nut	180	244	Use new nut, stake after
Cover Screws	8	11	—
⚠️ CV Bolts	45	61	—
⚠️ CV Joint Bolts	45	61	—
⚠️ Differential Cover Bolts	25	34	Apply RTV sealant
⚠️ Driveshaft Bolts	55	75	—
⚠️ Driveshaft Flange Bolts	15	20	—
Mounting Bolts	20	27	—
⚠️ Transfer Case Bolts	26	35	—
⚠️ Wheel Lug Nuts	100	136	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Transfer Case Torque Specs on Other Vehicles

Acura MDX

2001-2001 3.5L V6

Acura MDX

2002-2002 3.5L V6

Acura MDX

2003-2003 3.5L V6

Acura MDX

2004-2004 3.5L V6

Acura MDX

2005-2005 3.5L V6

Acura MDX

2006-2006 3.5L V6

Common Questions

What is the torque spec for transfer case on a 2008-2008 Dodge Dakota?

The primary torque specification for transfer case on a 2008-2008 Dodge Dakota is 244 Nm (180 lb-ft). Note: Use new nut, stake after

How many torque specs are there for Dodge Dakota transfer case?

There are 10 torque specifications for transfer case on the 2008-2008 Dodge Dakota 3.7L V6, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes