Home/Torque Specs/Dodge/Durango/2018-2018 3.6L V6 Pentastar/Airbag Module/Computer

2018-2018 Dodge Durango Airbag Module/Computer Torque Specs

3.6L V6 Pentastar

The 2018 Dodge Durango is equipped with a 3.6L V6 engine. Below you'll find detailed airbag module/computer torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1 hours

View Labor Time Details →

🔧 Torque Values11 specifications

Component	lb-ft	Nm	Notes
Battery Terminal Bolts	4	6	Do not overtighten
Bracket Bolts	17	23	—
Connector Screws	3	4	—
Cover Screws	9	12	—
⚠️ Ground Bolt	12	16	—
⚠️ Ground Strap Bolt	12	16	Clean contact surfaces
Ground Strap Bolts	9	12	Ensure clean contact
Module Mounting Bolts	6	8	—
⚠️ Mounting Bolts	29	39	—
Sensor Mounting Bolts	7	10	—
⚠️ Terminal Bolts	6	8	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Airbag Module/Computer Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for airbag module/computer on a 2018-2018 Dodge Durango?

The primary torque specification for airbag module/computer on a 2018-2018 Dodge Durango is 6 Nm (4 lb-ft). Note: Do not overtighten

How many torque specs are there for Dodge Durango airbag module/computer?

There are 11 torque specifications for airbag module/computer on the 2018-2018 Dodge Durango 3.6L V6 Pentastar, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes