Home/Torque Specs/Dodge/Durango/2020-2020 3.6L V6 Pentastar/Electric Power Steering Module

2020-2020 Dodge Durango Electric Power Steering Module Torque Specs

3.6L V6 Pentastar

The 2020 Dodge Durango is equipped with a 3.6L V6 engine. Below you'll find detailed electric power steering module torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1.5 hours

View Labor Time Details →

🔧 Torque Values11 specifications

Component	lb-ft	Nm	Notes
⚠️ Coupling Bolt	29	39	—
Cover Screws	9	12	—
Mounting Bolts	23	31	—
⚠️ Power Steering Line Fittings	22	30	Use new O-rings
⚠️ Rack Bolts	86	117	—
⚠️ Rack Mounting Bolts	86	117	—
⚠️ Steering Rack Bolts	74	100	—
⚠️ Tie Rod End Castle Nut	41	55	Use new cotter pin
⚠️ Tie Rod End Nut	46	62	Use new cotter pin
⚠️ Tie Rod Nut	46	62	—
⚠️ Wheel Lug Nuts	115	156	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Electric Power Steering Module Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for electric power steering module on a 2020-2020 Dodge Durango?

The primary torque specification for electric power steering module on a 2020-2020 Dodge Durango is 39 Nm (29 lb-ft).

How many torque specs are there for Dodge Durango electric power steering module?

There are 11 torque specifications for electric power steering module on the 2020-2020 Dodge Durango 3.6L V6 Pentastar, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes