ShopBaseFree forever shop management software for auto repair shops
Try ShopBase Free →
Home/Torque Specs/Dodge/Nitro/2007-2011 3.7L V6/Camshaft R&R

Camshaft R&R Torque Specifications

2007-2011 Dodge Nitro 3.7L V6

Labor Time:8 hours
View Labor Time Details →

🔧 Torque Values23 specifications

Componentlb-ftNmNotes
4865Apply threadlocker, hold cam stationary
1014Tighten in sequence, 3 passes
1014Tighten in sequence from center outward, multiple passes
710—
5980Hold cam with wrench on hex
1216—
710—
133180Often TTY - check spec, may require impact
1520—
133180Often TTY, may need impact
2027—
3547—
2635Use new crush washer
2230Tighten with cam lobe pointing away
1825Tighten evenly in sequence
811—
912Replace if worn
1825—
1825Install with pin/clip to compress
3345Tighten in sequence
1825Tighten in sequence
710—
710Tighten in sequence
⚠️ = Critical torque value | Always verify with vehicle-specific service manual
⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Camshaft R&R Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Mitsubishi Eclipse GSX

1995-1999 2.0L Turbo I4

Common Questions

What is the torque spec for camshaft r&r on a 2007-2011 Dodge Nitro?

The primary torque specification for camshaft r&r on a 2007-2011 Dodge Nitro is 65 Nm (48 lb-ft). Note: Apply threadlocker, hold cam stationary

How many torque specs are there for Dodge Nitro camshaft r&r?

There are 23 torque specifications for camshaft r&r on the 2007-2011 Dodge Nitro 3.7L V6, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes