Home/Torque Specs/Dodge/Viper/2003-2010 8.3L V10/Power Steering Rack

2003-2010 Dodge Viper Power Steering Rack Torque Specs

8.3L V10

Applies to 2003, 2004, 2005, 2006, 2007, 2008, 2009, and 2010 Dodge Viper

Labor Time:3 hours

🔧 Torque Values8 specifications

Component	lb-ft	Nm	Notes
⚠️ Power Steering Line Fittings	22	30	Use new O-rings \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Pressure Line Fitting	25	34	New O-ring
⚠️ Pump Mounting Bolts	20	27	—
⚠️ Rack Bolts	75	102	—
⚠️ Steering Rack Bolts	74	100	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod End Castle Nut	41	55	Use new cotter pin \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod Nut	40	54	—
⚠️ Wheel Lug Nuts	100	136	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Power Steering Rack Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for power steering rack on a 2003-2010 Dodge Viper?

The primary torque specification for power steering rack on a 2003-2010 Dodge Viper is 30 Nm (22 lb-ft). Note: Use new O-rings | ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL

How many torque specs are there for Dodge Viper power steering rack?

There are 8 torque specifications for power steering rack on the 2003-2010 Dodge Viper 8.3L V10, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes