Home/Torque Specs/Ferrari/360 Modena/2002-2002 3.6L V8/Steering Angle Sensor

2002-2002 Ferrari 360 Modena Steering Angle Sensor Torque Specs

3.6L V8

The 2002 Ferrari 360 Modena is equipped with a 3.6L V8 engine. Below you'll find detailed steering angle sensor torque specifications information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Share:X FB

Labor Time:1 hours

View Labor Time Details →

🔧 Torque Values8 specifications

Component	lb-ft	Nm	Notes
Cover Screws	9	12	—
Mounting Bolts	23	31	—
⚠️ Power Steering Line Fittings	22	30	Use new O-rings \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Rack Bolts	86	117	—
⚠️ Steering Rack Bolts	74	100	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod End Castle Nut	41	55	Use new cotter pin \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod Nut	46	62	—
⚠️ Wheel Lug Nuts	115	156	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Steering Angle Sensor Torque Specs on Other Vehicles

Acura CL

1997-1997 2.2L I4

Acura CL

1997-1997 3.0L V6

Acura CL

1998-1998 2.2L I4

Acura CL

1998-1998 3.0L V6

Acura CL

1999-1999 2.2L I4

Acura CL

1999-1999 3.0L V6

Common Questions

What is the torque spec for steering angle sensor on a 2002-2002 Ferrari 360 Modena?

The primary torque specification for steering angle sensor on a 2002-2002 Ferrari 360 Modena is 12 Nm (9 lb-ft).

How many torque specs are there for Ferrari 360 Modena steering angle sensor?

There are 8 torque specifications for steering angle sensor on the 2002-2002 Ferrari 360 Modena 3.6L V8, covering all related fasteners and components.

Last updated: March 2026

View Labor Times | View Fluid Specs | View DTC Codes