Home/Torque Specs/Ford/Edge/2011-2014 3.5L V6/Brake Fluid Flush

2011-2014 Ford Edge Brake Fluid Flush Torque Specs

3.5L V6

Applies to 2011, 2012, 2013, and 2014 Ford Edge

Labor Time:0.8 hours

🔧 Torque Values8 specifications

Component	lb-ft	Nm	Notes
⚠️ Bleeder Screw	7	10	Do not overtighten \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Bracket Bolts	86	117	—
⚠️ Caliper Bolts	75	101	—
⚠️ Caliper Bracket Bolts - Front	88	120	Threadlocker recommended \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Caliper Slide Pin Bolts	26	35	Apply silicone brake grease \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Master Cylinder Cap	3	4	Hand tight
Mounting Bolts	23	31	—
⚠️ Wheel Lug Nuts	103	140	Torque in star pattern \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Brake Fluid Flush Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for brake fluid flush on a 2011-2014 Ford Edge?

The primary torque specification for brake fluid flush on a 2011-2014 Ford Edge is 10 Nm (7 lb-ft). Note: Do not overtighten | ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL

How many torque specs are there for Ford Edge brake fluid flush?

There are 8 torque specifications for brake fluid flush on the 2011-2014 Ford Edge 3.5L V6, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes