ShopBaseFree forever shop management software for auto repair shops

Try ShopBase Free →

Home/Torque Specs/Ford/Edge/2011-2014 3.5L V6/Wheel Hub - Front

2011-2014 Ford Edge Wheel Hub - Front Torque Specs

3.5L V6

Applies to 2011, 2012, 2013, and 2014 Ford Edge

Labor Time:1.5 hours

View Labor Time Details →

🔧 Torque Values12 specifications

Component	lb-ft	Nm	Notes
⚠️ Axle Nut	207	281	Use new nut, stake after
⚠️ Axle Nut (4WD)	184	250	4WD models only. 2WD uses adjustable castle nut.
⚠️ Axle Nut (IWE)	25	34	⚠️ CAUTION: Small nut on 4WD IWE shaft. DO NOT OVERTORQUE or IWE will break. 2WD large nut is 295 lb-ft.
⚠️ CV Bolts	52	70	—
⚠️ CV Joint Bolts	52	71	—
Cover Screws	9	12	—
⚠️ Differential Cover Bolts	29	39	Apply RTV sealant
⚠️ Driveshaft Bolts	63	85	—
⚠️ Hub-to-Knuckle Bolts	129	175	Check manual for IWE (4WD) actuator alignment.
Mounting Bolts	23	31	—
⚠️ Wheel Bearing Unit Bolts	89	120	Excludes 2WD Ranger with separate bearings.
⚠️ Wheel Lug Nuts	115	156	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Wheel Hub - Front Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for wheel hub - front on a 2011-2014 Ford Edge?

The primary torque specification for wheel hub - front on a 2011-2014 Ford Edge is 281 Nm (207 lb-ft). Note: Use new nut, stake after

How many torque specs are there for Ford Edge wheel hub - front?

There are 12 torque specifications for wheel hub - front on the 2011-2014 Ford Edge 3.5L V6, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes