Home/Torque Specs/Ford/Escape/2005-2007 2.3L I4 Duratec/Piston Rings - All

2005-2007 Ford Escape Piston Rings - All Torque Specs

2.3L I4 Duratec

Applies to 2005, 2006, and 2007 Ford Escape

Labor Time:21 hours

🔧 Torque Values13 specifications

Component	lb-ft	Nm	Notes
⚠️ Connecting Rod Bolts	33	45	TTY - critical torque plus angle
Cover Bolts	12	16	—
⚠️ Cylinder Head Bolts	48	65	TTY - tighten in sequence plus angle
Electrical Connector Bolts	5	7	—
⚠️ Gasket Bolts	15	20	—
⚠️ Gasket Surface Bolts	15	20	Clean mating surfaces
⚠️ Main Bearing Cap Bolts	55	75	TTY - tighten in sequence plus angle
⚠️ Mounting Bolts	35	47	—
⚠️ Oil Drain Plug	26	35	Use new crush washer
⚠️ Oil Pan Bolts	9	12	Tighten in sequence
⚠️ Oil Pump Pickup Tube	9	12	—
Sensor Bolts	8	11	—
Sensor Mounting Bolts	8	11	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Piston Rings - All Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Mitsubishi Eclipse GSX

1995-1999 2.0L Turbo I4

Common Questions

What is the torque spec for piston rings - all on a 2005-2007 Ford Escape?

The primary torque specification for piston rings - all on a 2005-2007 Ford Escape is 45 Nm (33 lb-ft). Note: TTY - critical torque plus angle

How many torque specs are there for Ford Escape piston rings - all?

There are 13 torque specifications for piston rings - all on the 2005-2007 Ford Escape 2.3L I4 Duratec, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes