Home/Torque Specs/Ford/Escape/2008-2012 2.5L I4 Duratec/Head Gaskets - Both

2008-2012 Ford Escape Head Gaskets - Both Torque Specs

2.5L I4 Duratec

Applies to 2008, 2009, 2010, 2011, and 2012 Ford Escape

Labor Time:18.9 hours

🔧 Torque Values34 specifications

Component	lb-ft	Nm	Notes
⚠️ Camshaft Cap Bolts	10	14	Tighten in sequence from center outward, multiple passes
Camshaft Cap Bolts	10	14	Tighten in sequence from center outward, multiple passes
⚠️ Camshaft Sprocket Bolt	59	80	Hold cam with wrench on hex
Camshaft Sprocket Bolt	59	80	Hold cam with wrench on hex
Cover Bolts	12	16	—
Cover Bolts	12	16	—
⚠️ Crankshaft Pulley Bolt	133	180	Often TTY - check spec, may require impact
Crankshaft Pulley Bolt	133	180	Often TTY - check spec, may require impact
Cylinder Head Bolts	65	88	Multi-step + angle
⚠️ Cylinder Head Bolts	65	88	Multi-step + angle
Electrical Connector Bolts	5	7	—
Electrical Connector Bolts	5	7	—
⚠️ Exhaust Manifold Nuts	25	34	—
Exhaust Manifold Nuts	25	34	—
⚠️ Gasket Surface Bolts	15	20	Clean mating surfaces
Gasket Surface Bolts	15	20	Clean mating surfaces
⚠️ Intake Manifold Bolts	18	24	—
Intake Manifold Bolts	18	24	—
⚠️ Mounting Bolts	35	47	—
Mounting Bolts	35	47	—
⚠️ Oil Drain Plug	26	35	Use new crush washer
Oil Drain Plug	26	35	Use new crush washer
Rocker Arm Bolts	22	30	Tighten with cam lobe pointing away
⚠️ Rocker Arm Bolts	22	30	Tighten with cam lobe pointing away
Sensor Mounting Bolts	7	10	—
Sensor Mounting Bolts	7	10	—
⚠️ Timing Chain Tensioner Bolt	18	25	Install with pin/clip to compress
Timing Chain Tensioner Bolt	18	25	Install with pin/clip to compress
⚠️ Timing Cover Bolts - 8mm	18	25	Tighten in sequence
Timing Cover Bolts - 8mm	18	25	Tighten in sequence
VVT Solenoid Bolt	7	10	—
VVT Solenoid Bolt	7	10	—
Valve Cover Bolts	7	10	Tighten in sequence
Valve Cover Bolts	7	10	Tighten in sequence

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Head Gaskets - Both Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Mitsubishi Eclipse GSX

1995-1999 2.0L Turbo I4

Common Questions

What is the torque spec for head gaskets - both on a 2008-2012 Ford Escape?

The primary torque specification for head gaskets - both on a 2008-2012 Ford Escape is 14 Nm (10 lb-ft). Note: Tighten in sequence from center outward, multiple passes

How many torque specs are there for Ford Escape head gaskets - both?

There are 34 torque specifications for head gaskets - both on the 2008-2012 Ford Escape 2.5L I4 Duratec, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes