Home/Torque Specs/Ford/Excursion/2000-2005 5.4L V8 Triton/Wheel Hub - Front

2000-2005 Ford Excursion Wheel Hub - Front Torque Specs

5.4L V8 Triton

Applies to 2000, 2001, 2002, 2003, 2004, and 2005 Ford Excursion

Labor Time:1.5 hours

🔧 Torque Values12 specifications

Component	lb-ft	Nm	Notes
⚠️ Axle Nut	225	305	Use new nut, stake after
⚠️ Axle Nut (4WD)	184	250	4WD models only. 2WD uses adjustable castle nut.
⚠️ Axle Nut (IWE)	25	34	⚠️ CAUTION: Small nut on 4WD IWE shaft. DO NOT OVERTORQUE or IWE will break. 2WD large nut is 295 lb-ft.
⚠️ CV Bolts	56	76	—
⚠️ CV Joint Bolts	56	76	—
Cover Screws	10	14	—
⚠️ Differential Cover Bolts	31	42	Apply RTV sealant
⚠️ Driveshaft Bolts	69	94	—
⚠️ Hub-to-Knuckle Bolts	129	175	Check manual for IWE (4WD) actuator alignment.
Mounting Bolts	25	34	—
⚠️ Wheel Bearing Unit Bolts	89	120	Excludes 2WD Ranger with separate bearings.
⚠️ Wheel Lug Nuts	125	169	—

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Wheel Hub - Front Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for wheel hub - front on a 2000-2005 Ford Excursion?

The primary torque specification for wheel hub - front on a 2000-2005 Ford Excursion is 305 Nm (225 lb-ft). Note: Use new nut, stake after

How many torque specs are there for Ford Excursion wheel hub - front?

There are 12 torque specifications for wheel hub - front on the 2000-2005 Ford Excursion 5.4L V8 Triton, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes