Home/Torque Specs/Ford/Excursion/2003-2005 6.0L V8 Power Stroke Diesel/Front Main Seal

Front Main Seal Torque Specifications

2003-2005 Ford Excursion 6.0L V8 Power Stroke Diesel

Labor Time:4 hours

🔧 Torque Values13 specifications

Component	lb-ft	Nm	Notes
Cover Bolts	16	22	—
⚠️ Crankshaft Pulley Bolt	133	180	Often TTY - check spec, may require impact
Electrical Connector Bolts	7	9	—
⚠️ Gasket Bolts	20	27	—
⚠️ Gasket Surface Bolts	20	27	Clean mating surfaces
⚠️ Harmonic Balancer Bolt	133	180	Often TTY, may need impact
⚠️ Mounting Bolts	47	64	—
⚠️ Oil Drain Plug	26	35	Use new crush washer
Oil Pan Bolts	9	12	Front section only
Sensor Bolts	11	15	—
Sensor Mounting Bolts	11	15	—
⚠️ Timing Cover Bolts - 10mm	33	45	Tighten in sequence
⚠️ Timing Cover Bolts - 8mm	18	25	Tighten in sequence

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Front Main Seal Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for front main seal on a 2003-2005 Ford Excursion?

The primary torque specification for front main seal on a 2003-2005 Ford Excursion is 22 Nm (16 lb-ft).

How many torque specs are there for Ford Excursion front main seal?

There are 13 torque specifications for front main seal on the 2003-2005 Ford Excursion 6.0L V8 Power Stroke Diesel, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes