Home/Torque Specs/Ford/Explorer/2016-2019 3.5L V6/Transmission Input Shaft Bearing

2016-2019 Ford Explorer Transmission Input Shaft Bearing Torque Specs

3.5L V6

Applies to 2016, 2017, 2018, and 2019 Ford Explorer

Labor Time:9.2 hours

🔧 Torque Values18 specifications

Component	lb-ft	Nm	Notes
Cover Screws	9	12	—
Cover Screws	9	12	—
⚠️ Drain Plug	29	39	Use new washer
Drain Plug	29	39	Use new washer
⚠️ Fill Plug	29	39	—
Fill Plug	29	39	—
⚠️ Flywheel Bolts	70	95	Often TTY, tighten in star pattern
Flywheel Bolts	70	95	Often TTY, tighten in star pattern
⚠️ Mounting Bolts	52	71	—
Mounting Bolts	52	71	—
Pan Bolts	14	19	Torque in sequence
⚠️ Pan Bolts	14	19	Torque in sequence
Sensor Bolts	9	12	—
Sensor Bolts	9	12	—
⚠️ Transmission Drain Plug	22	30	Use new crush washer if equipped
Transmission Drain Plug	22	30	Use new crush washer if equipped
Transmission Pan Bolts	9	12	Tighten in criss-cross pattern
Transmission Pan Bolts	9	12	Tighten in criss-cross pattern

⚠️ = Critical torque value | Always verify with vehicle-specific service manual

⚠️ Some critical specs are estimated. Please verify sequence.

Other Jobs with Torque Specs

Transmission Input Shaft Bearing Torque Specs on Other Vehicles

Lincoln Town Car

1990-1997 4.6L V8 Modular

GMC Canyon

2007-2012 3.7L I5

Ford F-250 Super Duty

2011-2016 6.7L V8 Power Stroke Diesel

Kia EV6

2022-2024 GT-Line Dual Motor AWD

Honda Civic

1992-1995 1.5L I4 D15

Audi TT

2016-2023 2.0L Turbo I4

Common Questions

What is the torque spec for transmission input shaft bearing on a 2016-2019 Ford Explorer?

The primary torque specification for transmission input shaft bearing on a 2016-2019 Ford Explorer is 12 Nm (9 lb-ft).

How many torque specs are there for Ford Explorer transmission input shaft bearing?

There are 18 torque specifications for transmission input shaft bearing on the 2016-2019 Ford Explorer 3.5L V6, covering all related fasteners and components.

View Labor Times | View Fluid Specs | View DTC Codes